7
HEADPIECE ATTACHMENT (cont.)
1. Raise the front legs from their folded position by grasping
the horizontal crosspiece.
2. Straighten the folding leg support braces and lock them into
place by sliding the black brace locks over the brace joints.
Note: If the brace lock falls down off of the brace joint,
slide the lock back over the joint and exert a slight pressure
perpendicular to the brace at the brace lock. This will provide
sufficient friction to keep the brace lock in place.
5. Before raising the front legs from their folded position,
disengage the piston head from its locked position. Squeeze
the remote control lever and retract the piston head from the
hole in the frame.
FRONT LEG SET-UP
Table Set-Up
7
FRONT LEG SET-UP (cont.)
BACK LEG SET-UP
Raise the back legs, straighten the braces and lock them into
place (same as the front legs).