Thrustmaster TX racing wheel, User Manual

Page: 23 / 31

= Always connect the pedal set to the wheel before connecting the wheel to the console or
PC.
- Once the wheel has self-calibrated and the game has started, the pedals automatically
calibrate themselves after being pressed a few times.
- Never press on the pedals when the wheel is self-calibrating or when your game is starting
up, to avoid calibration problems.
- If the pedals are not functioning correctly or appear to be improperly calibrated, power off
your console, completely disconnect your wheel, then reconnect all of the cables (including
the power supply cable and the pedal set cable), power the console back on and restart
your game.
ATTACHING THE PEDAL SET TO A COCKPIT
- Attach the pedal set using the small screw threads located on the underside of the pedal
set.
-
Screw two M6 screws (not included) into the cockpit’s pedal support plate and into the two
small screw threads located on the underside of the pedal set.
Important: The length of the two M6 screws must not exceed the thickness of the
cockpit’s pedal support plate plus an additional 10 mm, to avoid damaging the pedal set’s
internal components.
ADJUSTING THE PEDAL SET
Each of the three pedals includes:
- A metal head (8) with multiple perforations (nine for the accelerator
– six for the brake – six
for the clutch).
- A plastic head support (7) (placed between the head and the arm) with four perforations.
- A pedal arm (6) with two perforations.