background image

 

*  Slowly,  press  very  hard  on  the  brake  pedal  so  as  to  reach  the  maximum  value  (if 

necessary,  stand  very  briefly  on  the  pedal 

–  just  for  a  second),  then  release  the 

pressure; or else 

 

* Move the conical stop a bit farther away from the back of the brake 

pedal’s arm. 

 

  

CONSUMER WARRANTY INFORMATION 

 

  

Worldwide,  Guillemot  Corporation  S.A.,  whose  registered  office  is  located  at  Place  du 

Granier, B.P. 

 

  

97143,  35571  Chantepie,  France  (hereinafter  “Guillemot”)  warrants  to  the 

consumer that this Thrustmaster product shall be free from defects in materials and 
workmanship, for a warranty period which corresponds to the time limit to bring an 
action for conformity with respect to this product. In the countries of the European 
Union,  this  corresponds  to  a  period  of  two  (2)  years  from  delivery  of  the 
Thrustmaster product. In other countries, the warranty period corresponds to the 
time limit to bring an action for conformity with respect to the Thrustmaster product 
according to applicable laws of the country in which the consumer was domiciled 
on the date of purchase of the Thrustmaster product (if no such action exists in the 
corresponding  country,  then  the  warranty  period  shall  be  one  (1)  year  from  the 
original date of purchase of the Thrustmaster product). 

 

  

Notwithstanding the above, rechargeable batteries are covered by a warranty period of six 

(6) months from the date of original purchase. 

 

  

Should the product appear to be defective during the warranty period, immediately 

contact Technical Support, who will indicate the procedure to follow. If the defect is 
confirmed,  the  product  must  be  returned  to  its  place  of  purchase  (or  any  other 
location indicated by Technical Support). Within the context  of  this  warranty,  the 

consumer’s  defective  product  shall,  at  Technical  Support’s  option,  be  either 
replaced  or  returned  to  working  order.  If,  during  the  warranty  period,  the 
Thrustmaster product is subject to such reconditioning, any period of at least seven 
(7)  days  during  which  the  product  is  out  of  use  shall  be  added  to  the  remaining 

warranty  period  (this  period  runs  from  the  date  of  the  consumer’s  request  for 
intervention or from the date on which the product in question is made available for 
reconditioning, if the date on which the product is made available for reconditioning 
is  subsequent  to  the  date  of  the  request  for  intervention).  If  permitted  under 
applicable  law,  the  full  liability  of  Guillemot  and  its  subsidiaries  (including  for 
consequential damages) is limited to the return to working order or the replacement 
of the Thrustmaster product. If permitted under applicable law, Guillemot disclaims 
all warranties of merchantability or fitness for a particular purpose. 

 

  

This warranty shall not apply: (1) if the product has been modified, opened, altered, 

or has suffered damage as a result of inappropriate or abusive use, negligence, an 
accident, normal wear, or any other cause unrelated to a material or manufacturing 
defect (including, but not limited to, combining the Thrustmaster product with any 
unsuitable element, including in particular power supplies, rechargeable batteries, 
chargers, or any other elements not supplied by Guillemot for this product); (2) if 
the  product  has  been  used  for  any  use  other  than  home  use,  including  for 
professional  or  commercial  purposes  (game  rooms,  training,  competitions,  for 
example);  (3)  in  the  event  of  failure  to  comply  with  the  instructions  provided  by 
Technical  Support;  (4)  to  software,  said  software  being  subject  to  a  specific 
warranty; (5) to consumables (e

lements to be replaced over the product’s lifespan: 

disposable batteries, audio headset or headphone ear pads, for example); (6) to 
accessories  (cables,  cases,  pouches,  bags,  wrist-straps,  for  example);  (7)  if  the 
product was sold at public auction. 

 

This warranty is nontransferable. 

 

  

Summary of Contents for TX racing wheel
































Reviews: