Thrane&Thrane SB5006, Operation Manual, Page: 17 / 38

15
two relays can be controlled. The relay terminals are available from the option connector.
The relay operation can be individually attached to channels. Clicking the “Aux Settings”
button will show the following window:
:
Figure 4.10: Example: Relay AUX2 will activate when ever channel 12 is selected on the VHF radio.
The operator is about to edit settings for channel 4.
D (Figure 4.7) – Private channels (3 x10) can be defined for each country mode (appearing
as F, L or P channels).
Note: If a special private channel is required to be available in e.g. international and US
mode, that channel has to be programmed in both international region and US region.
The same possibilities and restrictions for frequency entry as described for optional channel
tables apply for private channels. Only difference is that AUX relay settings are handled
locally for private channels.
Selecting a private channel table from one of the enabled regions (click View Table in Figure
4.7) will bring up the window shown in Figure 4.11.
Note: The radio is pre-configured from factory with 10 weather channels in US mode
(programmed on P0-P9), and with 3 weather channels in Canadian mode (P0-P2). This
reduces the number of free private channels accordingly for these two channel regions.
0546