Thrane&Thrane SB5006, Operation Manual, Page: 11 / 38

9
4 Use Scenarios
This section describes the users interactions required to configure the VHF 5000 series
system.
4.1 Configuration Level
The SB5006 service tool is only required for dealers/service workshops that are required to
do service and/or configuration of VHF 5000 series systems. The service tool is not compa-
tible with other Sailor VHF products (such as VHF2000, VHF3000 and VHF4000 series).
4.1.1 Setting DSC Parameters
Selecting the DSC Parameters menu item on the left side of the index page will bring up the
following page:
Figure 4.1: DSC relevant parameters.
A - The MMSI number can be changed any time just by entering a new number in the MMSI
field. The following values are valid for MMSI number entry:
• Enter the 9-digit MMSI number.
• Enter a 10-digit MMSI number, where the 10 th digit is a sub-address digit that can be
used to distinguish between multiple radios on the same vessel (range: 0-9).
• Clear the MMSI by removing all digits. Allows the user to program a new MMSI
number one time only from the radio front.
B - Up to 10 MMSI group numbers can be programmed (added, edited or deleted) from the
Group MMSI section. The radio will respond to group calls addressed to one of these
numbers.
C - For radios configured to inland waters (BI) operation, an ATIS code must be applied. The
ATIS number is entered or cleared by simply typing or deleting it from the ATIS number field.
0546