manualshive.com logo in svg

Thrane&Thrane SB5006, Operation Manual, Page: 12 / 38

Share
Download
Thrane&Thrane SB5006 Operation Manual Download Page 12

10

Example: A Dutch (MID-number 244) ship with call sign SP1234, should be programmed
with the following number (letter digit must be capital):

244P1234

4.1.2

Software upload

If new software releases are made available from Thrane & Thrane for the VHF 5000 series
system, such a software file will be made available for download from the Thrane & Thrane
extranet.

To perform the software update the downloaded software file must be stored on the PC
connected to SB5006.

Click the Update software menu item in the left area of the index page.

Figure 4.2:

The Update Software page is physically located in the SB5006.

A – The VHF software file is simply programmed by clicking the browse button, select the
acquired file and click on Apply.

Note: Any CU5000 in the system must be turned off during VHF software upload.

During the software upload sequence the VHF radio will indicate the software upload
progression by a pattern in the VHF channel display (Figure 4.3).

0546

Summary of Contents for SB5006







































Reviews:

No comments