Thrane&Thrane SAILOR TT-3000E mini-C GMDSS System, Installation Manual

Page: 42 / 97

TT-3000E mini-C GMDSS System Installation Manual
The unit must be fastened by the used of 4 screws, one in each
corner of the chassis as indicated by Figure 18. The
accessories for TT-3616C include 2 different types of screws
for the purpose, M5x12 and 5.5x25.
Figure 18 Drill template. All measures in mm.
The best grounding is made by screwing the chassis directly
on to the ships structure (provided it’s made of metal). If
proper grounding can not be made this way, then connect the
pre-mounted grounding wire to the ships structure. Find an
appropriate location as close as possible to the TT-3616C and
shorten the grounding wire accordingly. Terminate the
grounding wire with the yellow ring terminal found in the
accessory kit.
The correct (pre-mounted) position of the grounding wire is
shown in Figure 19.
42/97