16
Now, move to the desired item – dimmer or contrast – by means of:
Then, to select the item, press:
An example
When you select dimmer in the dimmer/contrast menu, the display
shows the dimmer menu:
To enable or disable the light, select the On or Off item respectively.
To adjust the dimmer level, select the Level item.
Then, to increase or decrease the dimmer level, use:
For the changes to take effect, press:
The dimmer/contrast menu may also be entered via the “Setup”
menu as follows:
1.
To enter the function menu, press:
2.
To select the “Setup” item, press:
3.
Find the “Light” item using
and press:
GPS
Via this menu item, it is possible to obtain the geographical position
in terms of longitude and latitude if an optional GPS receiver is
connected via the transceiver. If this is the case, the position is
available by going through the following steps:
1.
To enter the function menu, press:
2.
To select the “Setup” item, press:
3.
Find the “GPS” item using
and press:
Display
For each handset, the user may select the information to be shown in
the display when the handset is in ready state. However, the state of
the system will always be shown in the display. The available
choices are:
•
Time/date: Both the time (hours, minutes, seconds) and the date
is shown.
•
Time: Only the time (hours and minutes) is shown.
•
Position: If a GPS receiver is connected to the transceiver,
choosing “Position” will show the geographic position in terms of
latitude and longitude.
•
State only: Only the state of the transceiver is shown.
If for instance you want to choose time/date;
1.
To enter the function menu, press:
2.
To select the “Setup” item, press:
3.
Find the “Display” item using
and press:
DIMMER
>On
Off
Level
0512
Summary of Contents for Sailor SC4000 IRIDIUM
Page 1: ...OPERATION MANUAL SAILOR SC4000 IRIDIUM ...
Page 2: ......
Page 35: ......
Page 36: ...Thrane Thrane A S info thrane com www thrane com ...
