4
Chapter 1 Safety
1.1 Safety Information
For the continuing safety of the operators of this equipment, and the protection of the
equipment itself, the operator should take note of the
Warnings, Cautions
and
Notes
throughout this handbook and, where visible, on the product itself.
The following safety symbols may be used throughout the handbook and on the
equipment itself.
1.2 General Warnings
Shock Warning
Given when there is a risk of injury from electrical shock.
Warning
Given when there is a risk of injury to users.
Caution
Given when there is a risk of damage to the product.
Note
Clarification of an instruction or additional information.
Warnings
The unit must be connected only to an earthed fused supply of
5V.
The Equipment, as described herein, is designed for use by personnel
properly trained in the use and handling of laser equipment. Only
personnel trained in the servicing and maintenance of this equipment
should remove its covers or attempt any repairs or adjustments.
If this equipment is used in a manner not specified by the manufacturer,
the protection provided by the equipment may be impaired. Do not
operate the instrument outside its rated supply voltages or
environmental range. In particular, excessive moisture may impair safety.
This unit is intended for operation from a normal, single phase supply, in
the temperature range 5° to 40°C, 20% to 80% RH.
