35
T-Cube Laser Source
GetWavelength
Gets the output wavelength of the laser source
associated with the ActiveX control instance.
Identify
Identifies the controller by flashing unit LEDs.
LLGetStatusBits
Gets the controller status bits encoded in 32 bit
integer.
LLSetGetDigOPs
Sets or Gets the user digital output bits encoded in
32 bit integer.
LoadParamSet
Loads stored settings for specific controller.
ReadLaserPower
Returns the actual output power of the laser unit
associated with the ActiveX control instance.
ReadLaserCurrent
Returns the actual output current of the laser unit
associated with the ActiveX control instance.
SaveParamSet
Saves settings for a specific controller.
SetControlSrc
Sets the control source of the laser unit associated
with the ActiveX control instance.
SetDispIntensity
Sets the front panel LED display intensity.
SetGUIDispUnits
Sets the display mode of the associated GUI panel..
SetHWDispUnits
Sets the display mode of the associated hardware
unit.
SetPowerSetPoint
Sets the output set point of the laser unit associated
with the ActiveX control instance.
ShowEventDlg
Shows the event dialog when it has previously been
disabled using the EnableEventDlg method
StartCtrl
Starts the ActiveX Control (starts communication
with controller)
StopCtrl
Stops the ActiveX Control (stops communication
with controller)
Properties
APTHelp
Specifies the help file that will be accessed when the
user presses the F1 key. If APTHelp is set to 'True',
the main server helpfile MG17Base will be launched.
HWSerialNum
specifies the serial number of the hardware unit to
be associated with an ActiveX control instance.
