THORLABS LNR50 Series, Manual

Page: 22 / 28

20
Installation
5.6.4 LNR50 Linear Stage
Notes .
1) 2 holes ‘A’ (M6 or 1/4in.) 20mm clearance for mounting stages to tables or for X-Y and X-
Y-Z configurations.
2) Spacer plates are required between and below stages when fitting stepper motor drives.
Fig. 5.9 Dimensions – LNR50 series linear stage (shown with stepper motor drive fitted)
29.0
(1.14)
27.0
(1.06)
stepper
motor
42 (1.65)
square
piezo
actuator
TOP
A
1
A
1
8.0 (0.3)
motor mounting holes
100 (3.9)
square
25.0
(0.98)
25.0
(0.98)
25.0
(0.98)
25.0
(0.98)
50 (1.96)
76 (2.99)
13 holes threaded M6 (1/4-20 UNC)
x 6.0 (0.24) deep
all dimensions in mm (inches)