Page 29
ETN040053-D02
K-Cube Inertia Piezo Motor Driver
4.4.8 Menu Option - Enable Axis Mode
This option is used to set the way in which the motor
axis is enabled from the top panel CHANNEL
SELECT button, either a single axis, or a pair of axes.
It is also used to disable the motor axes.
Press the MENU button, then use the joystick to scroll
through the menu options.
Press the MENU button to enter the Enable Axis
Mode option.
Use the Joystick to select the required axis option.
During operation, channel selection is achieved via
the top panel CHANNEL SELECT button.
Enable Single
- The motor axes can be selected
individually, CH1 through CH4.
Enable Axis Pair
- The motor axes can be selected in
pairs, CH1 and CH2 or CH3 and CH4.
Disable All -
The motor channels are disabled.
Press the MENU button to save the selection and
return to the operating mode.
MENU
MENU
K I M 1 0 1
K I M 1 0 1
E n a b l e d A x i s C H 1
C h 1 _ X 1 + 0
C h 2 _ Y 1 + 0
C h 3 _ X 2 + 0
C h 4 _ Y 2 + 0
E n a b l e d A x i s 1 + 2
C h 1 _ X 1 + 0
C h 2 _ Y 1 + 0
C h 3 _ X 2 + 0
C h 4 _ Y 2 + 0
M e n u o p t i o n s
U s e j o y s t i c k
K I M 1 0 1
M e n u o p t i o n s
7 E n A x i s M o d e
K I M 1 0 1
E n a b l e S i n g l e
S e l e c t E n a b l e
K I M 1 0 1
MENU
MENU
