THORLABS ITC1 Series, Operation Manual

Page: 41 / 46

© 2018 Thorlabs GmbH
8 Appendix
39
8.5 Certifications and Compliances
Category Standards or description
EC Declaration of
Conformity - EMC Meets intent of Directive 2004/108/EC
1
for Electromagnetic Compatibility. Compliance was
demonstrated to the following specifications as listed in the Official Journal of the European
Communities:
EN 61326-1:2006 Electrical equipment for measurement, control and laboratory use –
EMC requirements:
Immunity: complies with basic immunity test requirements
2,3,5
.
Emission: complies with EN 55011 Class A Limits
2,3,4
IEC 61000-4-2 Electrostatic Discharge Immunity (Performance Criterion B)
IEC 61000-4-3 Radiated RF Electromagnetic Field Immunity (Performance Criterion
B)
6
IEC 61000-4-4 Electrical Fast Transient / Burst Immunity (Performance Criterion B)
IEC 61000-4-6 Conducted RF Immunity (Performance Criterion B)
EN 61000-3-2 AC Power Line Harmonic Emissions
Australia / New Zeal-
and Declaration of
Conformity
Complies with the Radiocommunications Act and demonstrated per EMC Emission standard
2,3,4:
AS/NZS 2064 Industrial, Scientific, and Medical Equipment: 1992
FCC EMC Compli-
ance Emissions comply with the Class A Limits of FCC Code of Federal Regulations 47, Part 15,
Subpart B
2,3,4
.
1 Replaces 89/336/EEC.
2 Compliance demonstrated using high-quality shielded interface cables shorter than or equal to 3 meters, including CAB400
cable installed at the CONTROL OUT port and with CAB430 cable installed at the LD/TEC port.
3
Compliance demonstrated with ITC100 series and DISP100 board modules installed in a Thorlabs PRO8000 mainframe unit
(with PRO8000 display disabled).
4 Emissions, which exceed the levels required by these standards, may occur when this equipment is connected to a test object.
5 Minimum Immunity Test requirement.
6 MOD IN port capped at IEC 61000-4-3 test.