Troubleshooting
Problem
Possible cause
Solution
Detergent dispenser
will not shut
Improper operation of the detergent cover
Add the detergent and rinse aid as indicated by
the manual
Water remains in the
dishwasher
Previous cycle has not finished or
has been
interrupted
Select the proper cycle as introduced by the
manual
Drain is clogged
Check the air gap if you have
Make sure the disposer is empty if the
dishwasher is connected to the disposer
Dishwasher does not
drain properly
Drain hose is kinked
Make sure the drain hose is properly connected
to the sink
Suds in the tub
Improper detergent is used
Make sure to use only the automatic dishwasher
detergent
Excessive suds caused by using the improper
detergent
Make sure to use only the automatic
dishwasher detergent
Dishwasher leaks
Dishwasher is not level
Leveling the dishwasher
(
see the installation
manual
)
Black or gray marks
on dishes
Aluminum utensils have rubbed against dishes
Chose a higher cycle
Make sure the inlet water is no less than 120
℉
Coffee and tea soil
Using a spot cleaner to remove the soil
Stained tub interior
Reddish stain
Some tomato food will cause this
,
use of the
rinse only cycle right after loading this will
decrease the staining
Detergent cup opening
\
Drain pump sound
This is normal
Noises
A hard object has entered the wash module
When
.
the object is ground up the
,
sound should stop
.
If the noise persists after a complete cycle
,
call for service
.
Water valve is turn off
Check if the water valve is turn on
Dishwasher won
't
fill
Door latch may not be properly seated
Make sure the door is closed
18
When some malfunctions come on, the appliance will display error codes to warn you:
Overflow.
Longer inlet time.
Faucets is not opened, or water intake is
restricted,or water pressure is too low.
Some element of dishwasher leaks .
E1
E4
E8
Open circuit or break of distributary valve.
Failure of orientation of distributary valve.
E9
Keep touching a button more than 30 seconds.
Water or something on the button.
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.
