H-DVB-S2X-MOD
Thor Fiber 2018 Tel: (800) 521-8467 Email: [email protected] http://www.thorbroadcast.com
Instead setting SW data under Mode 1, you will set the 2.10.3 Select ID, 2.10.5 Input ID and 2.10.6 ESW
Data under Mode E.
2.10.3 Select ID
[Device] Input
2.10.5 Input ID
0x000000000000
2.10.6 ESW Data
0X0000000000000000
3.2.3 Output Settings
Pressing UP/DOWN or LEFT/RIGHT to choose this item, ENTER and LEFT/RIGHT to set the parameters. The
system displays following page:
3.1 IF Frequency 3.2 IF Level ATT
3.3 Spec Invert 3.4 IF Output
3.2.3.1 IF Frequency Setting
After entering the submenu by pressing ENTER key, set IF output frequency. The IF output frequency range
is from 50 to 960MHz.
3.1 IF Frequency
0950.00MHz
3.2.3.2 RF Level ATT Setting
User can set the attenuation of the RF output at this submenu. The RF attenuation range is from
-28.5dB~+3
dB
in 0.5db step.
3.2 RF Level ATT
-10.0 db
3.2.3.3 Spectrum Invert
This submenu works in
case ‘Input’ is selected
under 2.10.3.
