H-DVB-S2X-MOD
Thor Fiber 2018 Tel: (800) 521-8467 Email: [email protected] http://www.thorbroadcast.com
Chapter 4 Web-based NMS Management
The Thor Broadcast Modulator supports front D-pad buttons with an LCD screen for control and
management, but you can also control and set the configuration by connecting the IRD to a PC via
the
web NMS Port. Make sure that the computer’s IP address is different from the Encoder’s IP
address otherwise it would cause an IP conflict and you will not be able to login.
4.1 Login
The default IP address of this device is
192.168.0.136
.
(We can modify the IP through the
front panel.)
Connect the PC (Personal Computer) and the device with included net cable, and use ping command to
confirm they are on the same network segment (subnet).
E.G. the PC IP address is 192.168.99.252, we then change the device IP to 192.168.99.xxx (xxx can be 0 to 255
except 252 to avoid IP conflict).
Use any web browser to connect the device with the PC by inputting the Encoder’s IP address in the browser’s
address bar and press Enter. (our units usually work better on Mozilla and IE, not Chrome)
It will display the Login interface as Figure-1. Input the Username and Password (Both the default Username
and Password are “admin”.) and then click “LOGIN” to start the device setting.
Login
