Trouble shooting
23
BURNER TROUBLE SHOOTING
HIGH TEMPERATURE PROTECTOR REMOVAL:
1. Shutdown the fryer. Follow the complete
shutdown procedure.
2. Shut-off the main isolation valve and follow
the lock-out/tag-out procedure.
3. Let the fryer cool down for a few minutes
before starting your work.
4. Remove the three mounting screws of the
bracket at the bottom of the fryer.
5. Remove the two mounting screws of the High
Temp. Protector on the bracket.
6. Remove the High Temp. Protector from the
bracket.
7. Remove the wires on the High Temp.
Protector.
8. Remove the burners on the side covering the
sensor probe. Follow the burner removal
procedure.
9. Remove the sensor probe from the fryer pot
thru the bottom.
10. Replace the High Temp. Protector if
necessary.
11. Make sure to check for oil leaks after
installing the sensor probe.
Remove the wires on the High Temp.
Protector
Remove the three screws at the bottom
of the fryer to remove the bracket
Remove the two mounting screws of the
High Temp. Protector on the bracket
SENSOR PROBE
OF COMBINATION
VALVE
SENSOR PROBE
OF HIGH TEMP.
PROTECTOR
Remove the sensor probe thru the
bottom of the fryer
HIGH TEMP.
PROTECTOR
PROBE SEAL
COMBINATION
VALVE PROBE
SEAL
