Trouble shooting
19
PILOT TROUBLE SHOOTING
PILOT TUBE REMOVAL:
1. Shutdown the fryer. Follow the complete
shutdown procedure.
2. Shut-off the main isolation valve and follow
the lock-out/tag-out procedure.
3. Let the fryer cool down for a few minutes
before starting your work.
4. Remove the burner for ease of access. Follow
the burner removal procedure.
5. Remove the FDS Assembly. Follow the FDS
Assembly removal procedure.
6. Disconnect the pilot tube from the ODS
injector. Use 12mm spanner.
7. Disconnect the other end of the pilot tube
from the combination valve. The other end
is accessible from the back of the fryer.
8. Replace the pilot tube if necessary.
9. Make sure to check for gas leak, using soap &
water, after part installation.
Disconnect the pilot tube from the FDS
assembly
Disconnect the pilot tube from the
combination valve
