Thor Motor Coach 2009 Mandalay, Owner'S Manual

Page: 106 / 190

MANDALAY
With a valid authority code (see previous), an access code can be programmed with the
following instructions.
• Depress the 5/6 button, then release after the keypad provides a confirmation beep
(approximately 5 seconds). The backlighting LED of the keypad will flash indicating
the learn mode.
• Enter the 5-digit authority code (see previous page). The keypad will provide a
confirmation beep.
• Press and release the button that corresponds to the access number (see below).
For example, depress 1/2 button to access the #1 and depress 3/4 button to access
#2. A confirmation beep will be heard after pressing the button.
• Now enter your new 5-digit access code. A confirmation beep will be heard after
entering the code.
• Re-enter the new access code. The keypad will provide confirmation beeps.
After performing the above sequence, the keypad will revert to default operation mode. Repeat
the process to assign additional access codes. Up to five (5) different codes can be assigned.
Use the following diagram to document your new access codes.
Locking Doors with the Keypad:
• Press and hold down the first button (1/2) for 1-2 seconds (an access code is not
required to lock the doors).
NOTE: After locking all doors from the keypad, the marker lights will flash once.
Unlocking Doors with the Keypad:
• Enter a valid 5-digit access code, confirmation beeps indicate the system is enabled.
• Depress the 3/4 button within 5 seconds and the entry door will unlock.
NOTE: If an unassigned button or no button is pressed while the system is enabled, the
keypad reverts to the disabled state.
7-4
EXTERIOR OPERATIONS
Assigning a New Access Codes
FUNCTION DIGIT 1 DIGIT 1 DIGIT 1 DIGIT 1 DIGIT 1
FUNCTION DIGIT 1 DIGIT 1 DIGIT 1 DIGIT 1 DIGIT 1
FUNCTION DIGIT 1 DIGIT 1 DIGIT 1 DIGIT 1 DIGIT 1
FUNCTION DIGIT 1 DIGIT 1 DIGIT 1 DIGIT 1 DIGIT 1
FUNCTION DIGIT 1 DIGIT 1 DIGIT 1 DIGIT 1 DIGIT 1