Thor Motor Coach 2009 Mandalay, Owner'S Manual

Page: 105 / 190

MANDALAY
Default Access Code:
Default Authority Code:
The Authority code should be changed upon purchase of your motorhome, for added security.
Use the following steps to change the Authority code, also be sure write the new code in the
area provided for reference later.
NOTE: Prior to setting the Authority & Access Codes, ensure you have a spare key with you at
all times to prevent accidental lockout from the motorhome.
Reset the keypad to the default state by performing the following procedure:
• Cycle (short then open) the S1 pins of the I/O module learn connector. There will be
a three-second beep.
• Enter a new five-digit code; this will be your access and authority code.
• Enter the new code again.
• The existing code will only erase if you properly enter the new one.
• The code is stored in position one.
Authority Code
NOTE: Authority and access codes should not be the same. If someone figures out an access
code and discovers it to also be an authority code as well, they can then create their own
access code and gain entrance to the motorhome.
After resetting the keypad, the next step should be to create a new access code and store it in
position one to ensure the access code is no longer the same as the authority code.
7-3
EXTERIOR OPERATIONS
DIGIT 1 DIGIT 2 DIGIT 3 DIGIT 4 DIGIT 5
1/2 3/4 5/6 7/8 9/0
DIGIT 1 DIGIT 2 DIGIT 3 DIGIT 4 DIGIT 5
7/8 7/8 7/8 7/8 7/8
DIGIT 1 DIGIT 2 DIGIT 3 DIGIT 4 DIGIT 5
Assigning a New Authority Code