29
Cook Top Safety Guidelines
`
✓
Keep handles out of the way. Turn handles so that they
don’t
extend over the edge of the range
or on a burner that is on.
✓
Take care when deep-frying. Oil or fat can overheat very quickly, particularly on a high setting.
✓
Make sure that all burner parts are properly in place. Incorrectly or incompletely assembled
burners may produce dangerous flames. See
‘Replacing
the burner
parts’
in
‘Care
and
cleaning’.
✓
Keep the burners clean, especially after a spill or boil over, make sure you clean the affected
burners before using them again. Food residue may clog the igniter and the notches of the
flame spreader, stopping the burner from functioning correctly. See ‘Care and cleaning’ for
instructions.
✓
Check that the burner flames. They should be blue with no yellow tipping, and burn without
fluttering all around the burner cap. If not, see ‘Troubleshooting’ for
advice.
Surface Burner Ignition
(LRG48”
cooktop Burner)
To light the top burners, push and turn the appropriate control knob counterclockwise to the
“HI”
position. You will hear a clicking noise
–
the sound of the electric spark igniting the burner. Once
burner ignition has been achieved, then turn the burner control knob to adjust the desired heat
setting.
Summary of Contents for LRG series
