Jan 9th 2019
www.thonk.co.uk
9
God’s Box – Loose Fruit
Eurorack DIY Kit
Instructions
Version 1.1
20.
Now solder the two J105 JFETs as
shown.
NOTE!
Orientation matters – be
sure to match the curve of the
body to the PCB silkscreen.
21.
Next place and solder the
remaining male headers on the
bottom PCB - these are placed on
the same side as the resistors and
capacitors as shown.
These should be soldered flush
and perpendicular to the PCB
surface.
Bottom Board
NOTE!
Don’t solder these headers to
the other side of the board like the
power header you already soldered!
22.
Now switch to the other PCB and
place but DO NOT SOLDER the
female headers on the top board.
The female headers sit on the
opposite side to all other
components as shown.
Before soldering these headers –
connect them to the male headers
you just soldered on the other
board. Once you have the PCBs
connected nicely with the headers
sitting flush you can then solder
them in place.
Now is also a good time to screw
the hex spacers onto the top PCB.
SWITCH TO OTHER PCB!
Top Board