Jan 9th 2019
www.thonk.co.uk
2
God’s Box – Loose Fruit
Eurorack DIY Kit
Instructions
Version 1.1
SOLDER JOINTS
Your solder joints should look like those shown as ‘OK’ below, they should
have that neat conical shape on
BOTH sides of the PCB
. If they don’t look
the same on both sides then stop! Work out why from the soldering guides
linked and don’t continue until you are getting those results.
This isn’t just OCD talking, you are very likely to end up with a destroyed,
damaged or defective unit if you’re not hitting that standard.
This photo is from the
Adafruit guide to excellent soldering
-
http://bit.ly/1jxqF3n
and is reproduced under an Attribution-Sharealike
creative commons license -
http://creativecommons.org/licenses/by-sa/3.0/