Jan 9th 2019
www.thonk.co.uk
10
God’s Box – Loose Fruit
Eurorack DIY Kit
Instructions
Version 1.1
23.
Now disconnect the PCBs and fit
all the ICs into their sockets as
shown.
NOTE!
Orientation is vital for all ICs
For the TL052 and TL072 ICs make
sure the black circle on the top
face of the IC is facing the end with
the notch in the IC socket as
pictured.
For all other chips make sure the
notch in the chip is at the side with
the notch in the IC socket.
24.
Next locate the two LEDs.
When viewing the LED bulb from
above or below, you should notice
that one side of the bulb has a
flattened edge.
The flat edge of the bulb must
match the flat edge on the PCB
silkscreen. Taking care of the
orientation - you can place the
LEDs –
DO NOT
solder them in yet!
TL072
TL074
TL052
TL072
TL052
TL072
Firmware
V2164D
TL072
LED Flat
