26
EN
RECORDING
Advanced Features For Video And D.S.C. (cont.)
OFF
DSC
P LA
YP
LA
Y
DUAL
VG
A
XG
A
PS
VID
EO
Dual Shooting
Lets you record images on a tape and store still images in a
MultiMediaCard simultaneously. In other words, it is
possible to store still images in the MultiMediaCard
without interrupting image recording on the tape.
1
Set the Shooting Mode Dial to “DUAL”, then set the
Power Switch to “
” or “
” while pressing down
the Lock Button located on the switch. Pull out the
viewfinder fully or open the LCD monitor fully.
2
While recording to a tape, press
SNAPSHOT
halfway.
A still image is displayed in the lower right corner of
the screen where the video image being recorded is
displayed.
•At this moment, if you release
SNAPSHOT
,
snapshot recording will be cancelled.
3
Press
SNAPSHOT
fully. The displayed still image is
stored in the MultiMediaCard.
NOTES:
●
If
SNAPSHOT
is pressed in the Record-Standby mode,
only a still image is stored in the MultiMediaCard. Video
recording does not take place.
●
If
SNAPSHOT
is pressed when “DIS” is set to “ON”
(
pg. 32), the Stabiliser will be disabled.
●
The Stabiliser is less effective in the DUAL mode than in
other modes.
●
The flash is disabled during video recording.
●
Still images are stored in the MultiMediaCard in VGA
mode file size (
pg. 15).
●
When the Shooting Mode Dial is set to “DUAL”, all
Fade/Wipe Effects and some Programme AE with special
effects cannot be used (
pg. 38 – 41).
Power Switch
FOCUS Button (
5
)
Video image
Shooting Mode Dial
Released position
Still image
Fully-pressed
position
Half-pressed
position
SNAPSHOT Button
SNAPSHOT Button
Lock Button
