THOMSON VK231PS, Technical Manual

Page: 17 / 139

13
SETUP MODE
GENERAL RESET
- Disconnect the video recorder from the power supply.
- Press <P+> and <P-> on the keypad. For a machine without these keys, press
<Stop>, <Play>, and <Standby> on the keypad.
- Reconnect the video recorder to the power supply, and release the keys.
The Setup consists of 14 digits corresponding to the Setup mode values.
In Setup mode, certain values can be entered according to the characteristics of the device
(see summary table).
DATA ENTRY
The digit to be confirmed flashes on screen. Use the number keys on the remote control to
make entries or changes.
Press <2> to go to the next digit. Press another number key to change the value from 0 to F.
Note: Before storing the parameters in memory, it is essential to go back to the first digit.
MEMORY
Press <Stop> on the remote control or keypad.
You can quit the menu without entering anything in the memory by pressing <Exit> or <Off>.
SETUP
0 2 1 0 8 4 4 4 B 0 9 1 0 3
STOP
store