manualshive.com logo in svg

THOMSON VK231PS, Technical Manual

Share
Download
THOMSON VK231PS Technical Manual Download Page 13

9

LANGUAGE SELECTION

Press and hold the EXIT/STATUS key on the remote control unit for a few seconds.  "French"
and "English" are displayed in turn.  Release the key to make your selection.

UHF MODULATOR CHANNEL ADJUSTMENT

Connect the antenna cable to the antenna system.
Press and hold the A menu key until SYS appears on the video recorder display.
Use the AV key to select the system.

SYS 1

France (L standard)

SYS 2

Western Europe (BG standard)

SYS 3

Eastern Europe (DK standard)

Press <A> to continue.

After a few seconds, the video recorder shows the channel number.  You can change it using
the + and - keys on the remote control.

OPERATING TIME

Press and hold the 0000 or ERASE key on the remote control for ten seconds.  A menu
appears on the screen, and shows the number of hours of operating time in Play Mode and
Record Mode.

Summary of Contents for VK231PS












































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands