P6
sTarTInguP
4.1languageselection
Press
pq
to choose your language, press
oK
to confirm. The
Select
Satellite
menu will
appear. Future installation steps are depending from satellite where your dish is aimed.
4.2selectsatellite
a)Yourdishisaimedtoastra1C,1E,1forhoTbIrdsatellite.
Press
pq
to select the ASTRA or HOT BIRD satellite and press
oK
. Follow the instructions.
When you have fixed your dish at correct direction choose
8
and press
oK
. The
Channel
Setup
menu will appear.
noTE:
If the OSD language “German” and the satellite “Astra 19.2E” are chosen, the receiver will
automatically load German pre-installed channels at the beginning of the channel list. If
the OSD language “Italian” and the satellite “HOT BIRD 13E” are chosen, the receiver will
automatically load Italian pre-installed channels at the beginning of the channel list.
b)Yourdishisaimedatanothersatellite
Select
Other
in
Select
satellite
menu and press
oK
, more satellites will be listed. If you select
one out of the satellite list, the
Configure
Antenna
menu will appear, please set the LNB
Type, LNB Low Freq, LNB High Freq, Band control, Polarisation control, DiSEqC Switch and
Antenna mode.
4.3antennamode
a)fixeddish
Set
Antenna
mode
to
Fixed
, select
8
and press
oK
. The
Adjust
antenna
screen appears,
select transponder receivable at your location and adjust the antenna position for maximum
level for the signal strength and quality. When adjustment is completed, choose
8
and press
oK
. The
Channel
Setup
menu will appear.
b)dishmountedondisEqC1.2motor
Set
Antenna
mode
to
DiSEqC
1
.
2
, choose
8
and press
oK
. The menu
Adjust
antenna
will
appear. Select the transponder receivable at your location (choose
Transponder
field and select
the transponder by pressing
tu
). Then choose the field
Move
Dish
and adjust the position
of the dish by pressing the
tu
. Once you adjusted the dish position choose
Store
position
,
set the number of the position by pressing
tu
. Then choose
8
and press
oK
. The
Channel
Setup
menu will appear.
c)dishmountedongoToXmotor
Set
Antenna
mode
to
GOTO
X
, choose
8
and press
oK
. The menu
Adjust
antenna
will appear.
Select the transponder receivable at your location (choose
Transponder
field and select the
transponder by pressing
tu
). Then choose the field
My
Longitude
and use the
numeric
buttons
to enter the value of your longitude. Use
tu
to select hemisphere
East
or
West
. Then
choose the field
My
Latitude
and the
numericbuttons
to enter the value of your latitude. Use
tu
to select hemisphere
Nord
or
South
. Choose the field
Goto
Position
and press
oK
. Your
dish will be turned to the position of the satellite. Then choose
8
and press
oK
. The
Channel
Setup
menu will appear.
Choose
8
and press
oK
to start the scan. When the scan is completed, the receiver will save
the services information automatically and exit to the normal play state.