YourrECEIvEr
P3
English
This manual provides complete instructions for installing and using this receiver. The following
symbols will serve as follow.
WarnIng
Indicates warning information.
TIPs
Indicates any other additional important or helpful information.
MEnu
Represents a button on the remote control or the receiver
(boldCharacter)
Move to
Represents a menu item within a window. (
Italic
Character
)
1.4accessories
1. User’s Manual
2. Remote control unit
3. 2x Batteries (AAA type)
4. IR Extender
noTE:
The batteries should not be recharged, disassembled, electrically short-circuited, be mixed
or used with other types of batteries. If rechargeable accumulators instead of batteries
are going to be used, we recommend using (e.g. NiMH) types with low self-discharge to
ensure long time operation of remote control.
1.5usageofexternalusbdevices
y
y
It is recommended to use USB 2.0 storage devices. If your device is not compatible to USB
2.0 specifications, recording, playback and other multimedia functions of the receiver would not
work properly.
y
y
To ensure best performance of your USB storage device please format it by this receiver (menu
Recording
Device
) to FAT32 system. Other file systems are not supported by the receiver.
y
y
THOMSON cannot guarantee compatibility to all types of USB storage devices.
y
y
If you are going to use external USB HDD (Hard Disk Drive) please consider that the power
specifications may exceed the supported output of your receiver (5 V/500 mA). If so, please
connect your USB HDD to an according external power adapter.
y
y
It is advised not to store important information on USB storage devices used with the receiver.
Always make backups of data on USB storage device before usage with receiver. THOMSON
will not take responsibility for any loss of information or circumstances caused by loss
of information.
2.0YourrECEIvEr
2.1defaultPIncode:0000
2.2frontPanel
Fig. 1
2.3rearPanel
Fig. 2
1.
saTouT
To connect an extra receiver to the satellite signal
from dish
2.
IrIn
To connect the IR extender
3.
saTIn
To connect to the LNB for satellite signal from dish
4.
TvsCarT
To connect to your TV set using a SCART cable.
5.
usb
To connect an USB device amplifier.