P14
symptoms
Cause
remedy
The remote control does
not work
The batteries of the remote
control are not inserted or
exhausted
Check whether the
batteries are inserted
correctly in your remote
control. Check the
batteries, and if exhausted
replace the batteries in the
remote control.
The USB storage device is
not recognized.
Wrong formatted
Format USB device
by receiver in menu
“Recording Device”
The external USB HDD
does not start.
Power consumption is too
high.
Connect extra power
supply adaptor to your USB
HDD.
8.0sPECIfICaTIons
demodulator
Modulation:
QPSK
Input Symbol Rate:
2~45 Ms/s
SCPC & MCPC signals from C & KU band satellites
videodecoder
Profile level:
MPEG-2 MP@ML
Input Rate:
Max. 60 Mbits/s
Video Resolution:
720 x 576 pixels (PAL), 720 x 480 pixels (NTSC)
Aspect Ratio:
4:3, 16:9
audiodecoder
ISO/IEC 11172 LAYER I&2
Sampling rate:
32, 44.1, 48 kHz
Audio modes:
Stereo, Joint stereo, Dual mono, Mono
Tuner
Front-End:
DVB-S
Input Frequency Range: 950~2150 MHz
RF Input Level:
-25~-65 dBm
LNB Power:
13/18 V DC (± 5%)
Max. 500 mA, Overload protected
DiSEqC Version:
1.0, 1.1 1.2
systemandMemory
Flash Memory:
16 Mbits
SDRAM:
128 Mbits
Connectors
SAT IN
SAT OUT
SCARTS TV (RGB, CVBS) / VCR (CVBS)
S / PDIF:
coaxial output
IR IN
USB port