THOMSON TM-SAL04DA, Instruction Manual, Page: 19 / 22

Open the coffee chute
Remove and assemble the protective lid
After coffee powder chute is opened, unplug the power cord from the power
socket and remove the protective lid.
Remove upper burr
Warning: Do not turn the knob forcibly, If the knob cannot be turned, let the coffee machine
grind one more time and then try again. If there are solid substances blocking the upper
and lower burrs and the knob cannot be turned, do not turn the knob forcibly, Repair must
be done by an authorized service center or authorized service personal only.
Cleaning grinder
启动
暂停 启动
暂停
● Standby mode (display off but the power cord remains plugged into the power
socket). Press and hold (4s) the key until the “Clean/Maintenance” indicator
light flashes (the coffee powder chute is opening).
● The coffee powder chute opens and “Open” is displayed; the grinder will operate for
5 seconds.
Remove the protective
lid
● Turn the protective
lid counter-clockwise
until the arrow points to
the “Unlock” sign.
● Remove the protective
lid upwards.
Assemble the protective
lid
● Point the arrow to the
“Unlock” sign.
● Turn the protective lid
counter-clockwise until
the arrow points to the
“Unlock” sign.
●
Push the coarseness indicator
down and turn the knob clockwise
until it aligns with the red point.
●
Remove the upper burr.
● Grinder is choked. Please use the brush to clean the coffee bean chute.
● Use a toothpick or straight paperclip to clean the coffee residue if necessary,
and then clean the residue using a vacuum cleaner.
● Use a hair-dryer to blow the grinder and coffee bean chute dry if necessary.
15 16
light off
flash
red point
Coffee
bean chute
vacuum
Coffee
bean chute
Coffee
bean chute