P20
MulTIMedIa
2.Progress
During the download progress a message will be displayed which details to the user any
message that the manufacturer requires. This message is broadcast as part of the download
and isn’t hard-coded into the interface. The message may describe new features of the
download or a contact number in case of download failure. A progress bar and a time
remaining countdown are displayed during the download.
If the download fails the following error message will be displayed.
Downloading
Download Fail
If the television uses one FLASH chip, the new images are download into another memory
space and then written to FLASH when the new images has been verified.
During the download you must not turn off the receiver, the following message is displayed.
While this message is displayed the television will not respond to any key presses.
Don’t Switch Off the Receiver
Download Completed
3.downloadmessageafterrestart
When the receiver restarts after a download, the following menu will be displayed. This can
contain either a success or failure message and any other information about the new software.
6.6systemInformation
The System Information screen displays the hardware version number and software version
numbers. The software version numbers depend on what modules are built into the software.
6.7Inactivitysettings
Here you can adjust the automatic standby function of your receiver. Possible settings are: 3
Hours or 4 Hours after the last press of a button or OFF. If OFF is selected, the receiver will not
automatically switch to standby mode.
7.0MulTIMedIa
This menu for the media playback, Multimedia must be used with external USB device,
otherwise the message
“Device is not ready!”
will be displayed, remove device when playing,
the message
“Device is removed!”
will be displayed.
