seTuPMenu
P19
6.5.1updatebyusb
This menu for the SW upgrading by USB jack.
1. First Copy the provided *.ssu (for example THT105_version_3.ssu) upgrade file to the root
directory of the USB disk and then insert the USB to the USB port of the box, you should
see USB indicator flashing while reading.
2. Select the upgrading file and press ok to start upgrading.
3. The upgrade progress will last for about 20 seconds as below, please don’t shut down the
power during update, otherwise it will destroy the box.
4. The USB upgrade will clear the user setting and erase the channel list database also.
noTe:
The update file must have *.ssu postfix, otherwise it can’t be recognised.
Software Upgrading
6.5.2updatebyoad(overairdownload)
1.notification
This menu is displayed when a new over air download is detected after power-up. This allows
you to select whether to start the download now or download later by adding the event to the
timer programming table.
If the event cannot be added, then an error message will be displayed. You can refuse the
download at this time by pressing exit (however, the download may be re-detected and
indicated at next power-up).
Some downloads may be signalled as high priority which means the manufacturer of the
receiver wants you to perform the download. In this case the download will automatically start
when detected or after leaving standby.
If a download is not available when manually checking for a download or the download
becomes not available while the above menu is being shown, then the following menu will be
displayed.
Download Available
Not Available
