P16
seTuPMenu
6.4.1fullscanaddnewservices
When the
Full Scan Add New Services
option is selected, the end of the service list is
displayed. When new services are found, they are displayed at the end of the existing list in a
highlighted yellow colour. During the scan a progress bar is displayed and a message giving the
estimated time remaining to complete the scan.
When the scan is complete the progress bar will show 100% and a message stating how many
new services have been found is displayed.
Full Scan Add New Services
Shows how many services have been added
6.4.2fullscanreplaceexistingservices
When
Full Scan Replace Existing Services
option is selected, the same as the
Full Scan Add
New Services
menu is displayed except that the existing services in the system are deleted
before the scan starts.
Full Scan Replace Existing Services
Manual Scan Menu
6.4.3Manualscan
This menu allows you to manually tune in services. Depending on the transmission this menu
will have different parameters.
Editable options are:
Channel:
Sets the required UHF channel. This will automatically fill in the
frequency entry.
Frequency:
Overrides and sets the frequency in kHz.
Tx Mode:
Selects the required transmission mode. The options are 2K and 8K.
