THOMSON TG797n Setup And User Manual Download Page 93

Page: 93 / 116

DMS-CTC-20101208-0018 v1.0

Thomson Gateway Network Services

9.1.4

Installing UPnP on Windows XP

Adding UPnP

If you are running Microsoft Windows XP, it is recommended to add the UPnP component to your system.

Proceed as follows:

In the

Start

menu, click

(Settings >) Control Panel

The

Control Pane

l window appears.

Click

Add or Remove Programs

The

Add or Remove Programs

window appears.

Click

Add/Remove Windows Components

The

Windows Components Wizard

appears:

In the

Components

list, select

Networking Services

and click

Details

The

Networking Services

window appears:

Select

Universal Plug and Play

UPnP User Interface

and click

Click

Next

to start the installation and follow the instructions in the

Windows Components Wizard

At the end of the procedure the wizard informs you that the installation was successful. Click

Finish

quit.

Adding IGD Discovery and Control

Your Windows XP system is able to discover and control Internet Gateway Devices (IGD), like the Thomson
Gateway on your local network. Therefore, it is recommended to add the IGD Discovery and Control client to
your system.

Proceed as follows:

Summary of Contents for TG797n




















































































































Search results

Summary of Contents for TG797n

Reviews:

Related manuals for TG797n

Brands by name

Popular brands

THOMSON TG797n, Setup And User Manual

Search results

Summary of Contents for TG797n

Reviews:

Related manuals for TG797n

Brands by name

Popular brands