THOMSON TG797n, Setup And User Manual

Page: 44 / 116

DMS-CTC-20101208-0018 v1.0
36
Configuration Tools
4.1.3 Protecting Access to the Thomson Gateway
Introduction
To prevent that every user on your local network can access the Thomson Gateway, the Thomson Gateway is
secured with a user name and password.
Default user name
The default user name is Administrator .
Default password
The default password is either blank or the ACCESS KEY printed on the label of your Thomson Gateway. This
depends on the settings chosen by your Service Provider.
Protected items
The following items are protected by these is will secure access to:
 The Thomson Gateway GUI.
 The embedded FTP Server.
for more information, see
“8.3 The FTP Server” on page 74 .
How to change your password
Proceed as follows:
1 On the Toolbox menu, click User Management .
2 In the Pick a task list, click Change my password .
3 Enter your new password and click OK .
4 Your new password is now active. The next time that you log on to the Thomson Gateway GUI you will
have to enter this password.
It is recommended to change the default password settings.
Choose a password that your can easily remember or write it down. If you forget your password
the only option is to reset your Thomson Gateway. For more information, see
“11.6 Reset to
Factory Defaults” on page 105 .
This password will also be used by the network file server and FTP server.
For more information about the network file server and FTP server, see “8 Sharing Content on
your Thomson Gateway” on page 65