THOMSON TG797n Setup And User Manual Download Page 25

Page: 25 / 116

DMS-CTC-20101208-0018 v1.0

Guided Installation

Introduction

In the guided installation, the Setup wizard on the Setup CD will assist you with the installation of your
Thomson Gateway.

If you do not want to use the Setup CD or if the Setup CD is not included in your package, follow the
installation procedure described in

“3 Manual Installation” on page 21

Requirements

To use the guided installation you must comply with the following requirements:



Your computer must run one of the following operating systems:



Microsoft Windows 7 and higher



Microsoft Windows 7 x64 and higher



Microsoft Windows Vista and higher



Microsoft Windows XP Service Pack 2 (SP2) and higher



Mac OS X 10.6 (Snow Leopard)



Mac OS X 10.5 (Leopard)



Mac OS X 10.4 (Tiger)



You must have administrative rights on your computer.

If you do not comply with these requirements, use the

“3 Manual Installation” on page 21

Running the Setup wizard

To start the Setup wizard:

Insert the Setup CD into your computer's CD- or DVD drive.

If your computer runs:



Microsoft Windows: The Setup CD starts automatically.
If the Setup CD does not autostart, see

“ The Setup CD does not start automatically” on page 100



Mac OS X: Double-click

Menu

in the window with the content of the Setup CD.

Select the language of your choice and click

The Setup wizard will now guide you through the installation of your Thomson Gateway.

Summary of Contents for TG797n




















































































































Search results

Summary of Contents for TG797n

Reviews:

Related manuals for TG797n

Brands by name

Popular brands

THOMSON TG797n, Setup And User Manual

Search results

Summary of Contents for TG797n

Reviews:

Related manuals for TG797n

Brands by name

Popular brands