THOMSON TG185n, Setup And User Manual

Page: 11 / 96

E-DOC-CTC-20080624-0009 v0.2 5
2 Installation
2 Installation
Introduction
In this chapter we will help you to:
1 Connect the cables .
2 Configure the THOMSON TG185n .
Connect the cables
Proceed as follows:
1 Plug the connector of the electric power supply adapter into the power inlet port on the back panel of
your THOMSON TG185n.
2 Plug the adapter into a nearby mains socket.
3 Plug one end of the Ethernet cable into the Ethernet port of your THOMSON TG185n.
4 Plug the other end of the Ethernet cable in the Ethernet port on your computer.
Configure the THOMSON TG185n
If you want to configure your THOMSON TG185n as:
Wireless Access Point, proceed with “3.1 Configuring The THOMSON TG185n As Access Point” on
page 8 .
Wireless Repeater, proceed with “4 The THOMSON TG185n as Wireless Repeater” on page 21 .
Wireless Client, proceed with “5 Your THOMSON TG185n as Wireless Client” on page 29 .
Ethernet ports are often marked with the following label: