THOMSON SpeedTouch 620, Operator'S Manual

Page: 95 / 216

Chapter 8
SpeedTouch™ Remote Access
E-DOC-CTC-20051017-0155 v1.0
85
Configuration via
CLI commands
To have HTTPs access via WAN, additional configuration of the HTTPs service is
needed.
Use the following CLI command to allow HTTPs access from the WAN to the
SpeedTouch™:
If you take a look at the HTTPs service configuration, you will see that the wan
group is added to the
Interface Access List
:
=> :service system ifadd name=HTTPs group=wan
=>
=> :service system list name=HTTPs expand=enabled
Idx Name Protocol SrcPort DstPort Group
-----------------------------------------------------------------------
1 HTTPs tcp 443
Description............... HTTP web server over ssl
Properties................ server
Attributes................ state port aclip aclif aclifgroup map log
User Managed Attributes... state port aclip aclif aclifgroup map log
Attribute Values :
State...................... enabled
Port....................... 443
Ip Access List............. any
Interface Access List...... any
Interface Group Access List lan
wan
Map List................... 443
Logging.................... disabled
=>