THOMSON SpeedTouch 620 Operator'S Manual Download Page 25

Page: 25 / 216

Chapter 3

SpeedTouch™ System Software

E-DOC-CTC-20051017-0155 v1.0

3 SpeedTouch™ System Software

3.1 About the System Software

Upgrade system

software

For new system software packages, you can visit the SpeedTouch™ support pages
at:

http://www.speedtouch.com

System software

packages and security

All SpeedTouch™ system software packages are:

Digitally signed and encrypted:
Packages that may have become corrupted, or have been altered in any way,
will not be accepted by the SpeedTouch™.

Specific per product.

This way, the SpeedTouch™, or its service can never be corrupted or lost.

Summary of Contents for SpeedTouch 620
























































































































































































































Search results

Summary of Contents for SpeedTouch 620

Reviews:

Related manuals for SpeedTouch 620

Brands by name

Popular brands

THOMSON SpeedTouch 620, Operator'S Manual

Search results

Summary of Contents for SpeedTouch 620

Reviews:

Related manuals for SpeedTouch 620

Brands by name

Popular brands