THOMSON SpeedTouch 620, Operator'S Manual

Page: 20 / 216

Chapter 2
SpeedTouch™ Command Line Interface
E-DOC-CTC-20051017-0155 v1.0
10
2.4 Command Line Interface Commands
Executing Commands
from the Top Level
All CLI commands are commands that operate on, or configure, the SpeedTouch™
settings.
You can use these commands from top level, preceded by the name of the
command group from which the command should be executed (for example
firewall list ).
=> :firewall list
Config
======
State : disabled
Keep : disabled
TcpChecks : none
TcpWindow : 65536
UdpChecks : disabled
IcmpChecks : disabled
LogDefault : disabled
LogThreshold : enabled
Modules
=======
Module State Text Hooks
-----------------------------------------------------------------------
fire enabled Firewall Administration Module sink, forward,
source
host_service enabled Firewall Host Service Module forward
level enabled Firewall Level Module forward
system_service enabled Firewall System Service Module sink
=>