THOMSON SpeedTouch 580, Installation And Setup Manual

Page: 29 / 50

Chapter 2
Basic Installation
23
E-DOC-CTC-20050429-0061 v2.0
2.5.1 Installing USB drivers
USB connection
You may want to connect your computer to the SpeedTouch™ using the USB port.
To be able to do so, you must install the corresponding USB driver.
Supported operating
systems
USB connectivity on the SpeedTouch™ is supported for:
Microsoft Operating Systems:
MS Windows 98SE
MS Windows Millennium
MS Windows 2000
MS Windows XP
You may need the Windows installation CD during installation.
Mac Operating Systems:
Mac OS X 10.2 (Jaguar)
Mac OS X 10.3 (Panther)
Mac OS X 10.4 (Tiger)
Installing Windows USB
drivers
The first time you connect the SpeedTouch™ to your computer through the USB
port, as soon as you plug the USB cable into the computer, you will be prompted for
a USB driver.
You will find the required USB driver software on the Setup CD. The installation is
plug and play, meaning that installation will require almost no effort.
Proceed as follows:
1
Insert the blue USB cable provided into the SpeedTouch™ USB port marked
with the USB logo.
2
The other end of the USB cable fits in (one of) the USB port(s) of your
computer. In most cases your computer's USB port is marked with the same
USB symbol.
3
Windows will automatically recognise the Thomson USB Remote NDIS
device:
The installation procedure might be slightly different depending on
the MS Windows OS you are using.
An USB logo looks like this:
You can also connect your computer to the SpeedTouch™ via a USB
hub, provided that the hub is autonomously powered.