ITC222 Geometry & Convergence Procedures
21
G
EOMETRY
T
EMPLATE
WITHOUT
C
ONVERGENCE
G
EOMETRY
T
EMPLATE
WITH
C
ONVERGENCE
G
EOMETRY
T
EMPLATES
The following diagrams show a pattern as it should appear correctly adjusted for geometry.
Remember that geometry cannot create a perfect pattern, but aligning the pattern to appear similar
to the patterns shown will allow sensor calibration and autoconvergence to operate properly and
efficiently.
Of course the second pattern will not instantly appear when the convergence yokes are reconnected.
It is the result of both correct geometry and convergence alignments.
