THOMSON GRASS VALLEY Profile XP PVS3000, Installation Manual

Page: 45 / 48

Select an RS-422 control protocol
23 February 2004 PVS3000 & PVS 3500 Installation Guide
45
Setting up RS-422 remote control using Prolink (Profile protocol)
Use this procedure to start and set up Prolink to control the Profile XP Media Platform
using Profile protocol.
1. Close VdrPanel if you used it earlier to test your record and play channels.
2. Open Prolink using the shortcut on the desktop or by selecting
Start | Programs |
Profile Applications | Prolink
.
3. Select an RS-422 serial port, then click
Select
. The Prolink window appears.
4. Test the PVS3000 system using your controller.
5. Repeat steps 2-4 for the number of control ports you need to control the PVS3000
using Profile protocol.
NOTE: For more information on the Prolink user interface see Chapter 8,
“Controlling the Profile XP Remotely” in the Profile XP System Guide.
This completes all the procedures in this Installation Guide. Refer to the Profile XP
System Guide for more information on customizing settings for your application.