background image

EN

19

Advanced Sound Control

Sound Enhancement Systems

This receiver is equipped with several built-in sound
enhancement systems.

Dolby Digital 

The Dolby Digital mode lets you enjoy full digital 
surround from software processed in the Dolby
Digital format. Dolby Digital provides better sound
quality and more powerful presence than
conventional Dolby Surround.

This unit is equipped with Dolby Digital 5.1-channel
so that you can enjoy enhanced full digital surround
sound. Being different from Dolby Pro Logic in which
only four channels ( Front Left, Front Right, Centre
and Rear ) are used, the new system provides stereo
separation of the rear speakers (Rear-Right, Rear-Left
). These 5 channels, together with the subwoofer
channel for bass sounds (counted as 0.1 channel ),
constitute as 5.1-Channel ( or 6 Channels ) Input for
Dolby Digital that brings you the most sophisticated
sound enjoyment. 

Dolby Pro Logic

II

The Pro Logic 

II

mode uses the built-in circuit to steer

the Left, Center, Right and Surround left and right
channel audio signals and uses all five speakers  to play
both stereo and Dolby Pro Logic program source, such
as TV and VCR.  Dolby Pro Logic 

II

includes Dolby Pro

Logic 

II

Movie, Dolby Pro Logic 

II

Music and Dolby Pro

Logic Emulation.

You can use this mode with any stereo program source
(such as VCR/SAT) to enjoy multi-channel sound
experience.

Digital Theater Systems (DTS)

DTS is a digital surround system which delivers six
channels of master-quality, 20-bit audio.  It offers five
full-range channels plus a special low frequency
effect (LFE) channel for subwoofer, resulting
commonly know 5.1 channels. It can be applied with
existing 5.1 speaker configurations.

DTS is available in DVD, SAT/CAB, TV and CD mode.
(When digital cable is connected)

Front Left Speaker

Front Right Speaker

Subwoofer

Center Speaker

Rear Right Speaker

Rear Left Speaker

Listening 

Zone

Front Left Speaker

Front Right Speaker

Subwoofer

Center Speaker

Rear Right Speaker

Rear Left Speaker

Listening 

Zone

DPL590  EN   12/16/04  3:59 PM  Page 23

Summary of Contents for DPL590





























Reviews: