EN
25
Care and Maintenance
Disconnect the audio system from the power source before
performing any maintenance.
Cleaning
Clean the exterior of the system using a soft dust cloth.
Important battery information
• Remove the batteries to avoid leakage if you do not
use your remote control for more than one month.
• Discard leaky batteries immediately as leaking
batteries may cause skin burns or other personal
injuries.
• Dispose of batteries in the proper manner, according
to provincial and local regulations.
• Any battery may leak electrolyte if mixed with a
different battery type, if inserted incorrectly, if all
batteries are not replaced at the same time, if
disposed of in fire, or if an attempt is made to charge
a battery not intended to be recharged.
Safety precautions
• Never open the cabinet under any circumstances.
Any repairs or internal adjustments should be made
only by a trained technician.
• Never operate this product with the cabinet removed.
• Do not touch the player with wet hands. If any liquid
enters the player cabinet, take the player to a trained
technician for inspection.
• The apparatus shall not be exposed to dripping and
splashing.
• No object filled with liquids, such as vases, shall be
placed on the apparatus.
• No naked frame sources such as lighted candles ,shall
be placed on the apparatus.
Headset safety
• Do not play your headset at a high volume. Hearing
experts warn against extended high-volume play.
• If you experience a ringing in your ears, reduce
volume or discontinue use.
• You should use extreme caution or temporarily
discontinue use in potentially hazardous situations.
• Even if your headset is an open-air type designed to
let you hear outside sounds, don’t turn up the volume
so high that you are unable to hear what is around
you.
Don’t infringe
This product should only be used for the purposes for
which it is sold, that is, entertainment, violating no
copyright law. Any attempts to use this product for which it
is not intended is unlawful and therefore not condoned by
Thomson.
Equipment Specifications:
AMPLIFIER SECTION:
RMS Output Power: Dolby Digital Mode with 10% Total
Harmonic Distortion
Rear Channels: 55 Watts each Channel (1KHz, 6 Ohm)
Front and Center Channel: 98 Watts (1KHz, 3 Ohm)
Subwoofer Channel: 98 Watts (100Hz, 3 Ohm)
Total RMS Output Power, Dolby Digital mode : 500 W
DIN Output Power: Dolby Digital Mode with 10% Total
Harmonic Distortion
Front Channels (L and R ): 50 Watts per Channel (1KHz,
3 Ohm)
Rear Channels (L and R): 44 Watts per Channel (1KHz, 6
Ohm)
Center Channel: 90 Watts (1KHz, 3 Ohm)
Subwoofer Channel: 90 Watts (100Hz, 3 Ohm)
DIN Output Power: Dolby Digital Mode with 1% Total
Harmonic Distortion
Front Channels (L and R ): 34.1 Watts per Channel
(1KHz, 6 Ohm)
Rear Channels (L and R): 34.1 Watts per Channel (1KHz,
6 Ohm)
Center Channel: 65 Watts (1KHz, 3 Ohm)
Subwoofer Channel: 65 Watts (100Hz, 3 Ohm)
Muting Attenuation: 65dB
Frequency Response: 20kHz /-3dB, 1kHz ref.
Subwoofer Frequency Response: 10 Hz / -3db, 80Hz ref.
DIN 1kHz FL / FR STEREO mode : 45W x2 @ 6ohm <10%
THD
Signal to Noise Ratio: 65dB (Dolby digital mode)
Video Signal to Noise Ratio from 40 dB to 60dB
AM TUNER SECTION:
Frequency Response: 2kHz +/-6dB, 1kHz ref.
Usable Sensitivity: 800uV/m @ S/N 20dB
Signal to Noise: 38dB
IF Rejection: 35dB
FM TUNER SECTION:
Frequency Response: 15kHz +/-3dB, 1kHz ref.
Quieting: 24dBu
Signal to Noise: 60dB(stereo) / 65dB(mono)
IF Rejection: 50dB
Dimensions (H x W x D mm) :
Unit - 95 x 430 x 355
Front and Surround Speakers - 156 x 80 x 90
Center Speaker - 68 x 248 x 85
Subwoofer - 316 x 160 x 355
DPL590 EN 12/16/04 3:59 PM Page 29
