THOMSON 780 (WL), User Manual

Page: 47 / 132

39
E-DOC-CTC-20051017-0149 v1.0
Chapter 4
Voice over IP
Enable the telephony
service
Proceed as follows to enable the telephony service:
1
Go to the SpeedTouch™ Web pages.
2 In the menu, select Toolbox > Telephony.
3
In the upper right corner, click Configure.
4
Select Service Enabled .
5
Click Apply .
Assign phone numbers
Proceed as follows to configure your Internet SIP telephone numbers:
1
Go to the SpeedTouch™ Web pages.
2
In the menu, select Toolbox > Telephony .
3
In the upper right corner, click Configure.
4
Assign phone numbers to phone port 1 (FXS1) and phone port 2 (FXS2). If you
want to use the same number for both ports, select Port ‘all’.
5
Click Apply .
Configure the telephony
service
Proceed as follows to configure the SIP telephony service:
1
Go to the SpeedTouch™ Web pages.
2 In the menu, select Toolbox > Telephony .
3
In the upper right corner, click Expert configure .
4
Enter the IP address and the port number of the registrar and the proxy, as
For more information, see “1.2.1 Access via the Web Interface” on
page 7 .
The phone numbers are provided by your provider.