THOMSON 780 (WL) User Manual Download Page 108

Page: 108 / 132

100

E-DOC-CTC-20051017-0149 v1.0

Chapter 5

SpeedTouch™ Web Interface

5.6.1 Devices

Overview

The

Overview

page gives you an overview of the devices that are currently

connected to the SpeedTouch™ network. Click on a device name to get more
information on a specific device.

Configure

The

Configure

page gives you an overview of the devices that are currently

connected to the SpeedTouch™ network.

If you want to:

Get more information on a specific device, click on the name of the device.
See

“5.6.2 Device Settings” on page 101

for more information.

Edit a device from the

Detected Device(s)

list, click

Edit

Delete a device from the

Detected Device(s)

list, click

Delete

The detected device ‘dsldevice’ is the SpeedTouch™ itself.

Once a device connects to the SpeedTouch™ network, it will remain
listed in the

Detected Device(s)

list until you delete it.

Summary of Contents for 780 (WL)




































































































































Search results

Summary of Contents for 780 (WL)

Reviews:

Related manuals for 780 (WL)

Brands by name

Popular brands

THOMSON 780 (WL), User Manual

Search results

Summary of Contents for 780 (WL)

Reviews:

Related manuals for 780 (WL)

Brands by name

Popular brands