background image

EN

22

English

Chapter 8 - Other information

Password in Parental Control

 - The default password is 1234. You can change it to 

a new one.

 - The super password is 0423. If you forget your 

code, enter the super password to override any 

existing codes.

Troubleshooting

Please check the following list before requesting 

service.

There is no picture or sound.

• Make sure the power cord is properly inserted in the 

power outlet.

• Make sure the source type is set correctly.

• Make sure the antenna is properly connected.

• Make sure the volume is not set to minimum or the 

sound is not set to mute.

• Make sure the headphones are not connected.

• The TV may be receiving a signal other than from 

TV broadcasting stations.

Picture is not clear.

• Make sure the antenna cable is properly connected.

• Consider whether your TV signal is being properly 

received.

• Poor picture quality can occur due to a VHS 

camera, camcorder, or other peripheral being 

connected at the same time. Switch off one of the 

other peripherals.

• The ‘ghost’ or double image may be caused by 

obstruction to the antenna due to high-rise buildings 

or hills. Using a highly directional antenna may 

improve the picture quality.

• The horizontal dotted lines shown on the pictures 

may be caused by electrical interference, e.g., hair 

dryer, nearby neon lights, etc. Turn off or remove 

these. 

Picture is too dark, too light or tinted. 

• Check the colour adjustment. 

• Check the brightness setting.

• Check the sharpness function. 

Remote control does not work.

• Check the batteries of the remote control. 

• Make sure the remote sensor window on the TV 

front is not under strong fluorescent lighting. 

• Try to clean the remote sensor window on the TV 

front with a soft cloth.

If the above suggestions do not solve your technical 

issue, please refer to the warranty card for service 

information. 

Television specifications

TV Broadcasting

PAL/SECAM BG/DK/I/LL’ 

Receiving channels

VHF/UHF/Cable

Tuner type

Frequency synthesized

Operating Conditions

Temperature 5°C - 35°C (41°F - 95°F)

Humidity 20 - 80% (non-condensing)

Storage Conditions

Temperature -15°C - 45°C (5°F - 113°F)

Humidity 10 - 90% (non-condensing)

OSS Notice

This product uses the GPL (Version 2) and LGPL 

(version 2.0 and 2.1) and MPL (version 1.1).

To send inquiries and requests for questions 

regarding open source, contact nearest TCL office.

This product uses some software programs which are 

distributed under the Independent JPEG Group.

This product uses some software programs which are 

distributed under the libpng Project.

This product uses some software programs which are 

distributed under the Freetype Project.

This product uses some software programs which are 

distributed under the Freedesktop Project.

This product uses some software programs which are 

distributed under the ICU Project.

This product uses some software programs which are 

distributed under the SQLlite Project.

This product uses some software programs which are 

distributed under the zlib Project.

This product uses some software programs (png, 

png12) which are distributed under the libpng Project.

This product uses some software programs (ogg) 

which are distributed under the libogg Project.

This product uses some software programs (crypto) 

which are distributed under the Apache Project.

This product uses some software programs (libxml2, 

curl, expat, cares) which are distributed under the 

MIT.

This product uses some software programs which are 

distributed under the GPL/LGPL/MPL/MNG/BSD.

GPL software: Linux Kernel, gettext, gtk+, libsoup, 

webkit(gtk), atk, glib, pango, glib-networking, libiconv, 

pixman, gnutls, vorbisidec

LGPL software: libgcrypt, enchant, libgpg-error, cairo, 

DFB (DirectFB)

MNG software: mng

BSD software: webp

[Legal Statement] of TCL - manufacturer of this 

TV set

Due to the various capabilities of products featuring 

the SmartTV - Services, as well as limitations in the 

available content, certain features, applications, and 

services may not be available on all devices or in 

all territories. Some features on SmartTV may also 

require additional peripheral devices or membership 

fees that are sold separately. Please visit our website 

for more information on specific device information 

and content availability. The services and availability 

Summary of Contents for 50UA6406
























Reviews: