background image

EN

16

English

Using more of your TV

• 

End time

: use the numeric buttons to set the 

end time.

• 

Schedule type

: use 

/

 to select the 

available schedule type.

 - Select 

Reminder

 to be reminded that you can 

switch to the scheduled programme when the 

time you have set comes. 

 - Select 

Record

 (if available) if you want to 

start your scheduled recording when the time 

you have set comes. When time is out and 

you do not execute any operation, scheduled 

recording will start automatically. 

• 

Repeat type

: use 

/

 to select different 

repeat mode for the schedule. 

• Press 

/

 to select 

Add schedule

, and press 

OK

 to confirm.

3. 

Press 

GUIDE

 or 

EXIT

 to exit EPG.

MHL (Mobile High-Definition Link)

(* not available for some models)

You can use the following functions by connecting the 

HDMI port identified with MHL on the TV and the USB 

port of an MHL compatible mobile phone or similar 

device with an MHL cable.
• Charge your mobile phones from the TV.

• Two-way remote operation between TV and mobile 

phone.

• Video or audio output from your mobile phone.

Notes: 

 

-

These functions may not be available depending 

on the connected equipment.

 

-

If there is no more battery life left in the 

connected device, charging will not start.

 

-

To operate the mobile phone with the TV remote 

control, you need to turn on the 

T-Link

 function 

first, then press 

OPTION

 and select 

T-Link > 

Setup > Guide menu

. Follow the virtual keypad 

to do operations.

Connecting MHL compatible device

• Connect the MHL compatible device to the HDMI 

port identified with MHL on the TV using an MHL 

cable (not supplied), charging will start automatically.

• When connecting an MHL compatible device to the 

HDMI port identified with MHL on the TV, switch the 

TV input source to the corresponding HDMI input.

Note: Do not connect the MHL compatible device 

to any ports other than the HDMI port 

identified with MHL.

When using MHL

• Interoperability with MHL devices from other 

manufacturers is not guaranteed.

• TCL does not provide any guarantee, therefore, 

against operational failure such as that described 

below when an MHL source is connected to the TV.

 - No picture or sound

 - Some of the functions do not work by remote 

operation from the TV

• If MHL does not work properly, also contact the 

manufacturer of the source device for advice on its 

use.

• Do not disconnect the power plug of the TV when 

the TV is active and the MHL device is connected.

• Do not disconnect the power plug of the TV when 

the TV is in standby mode and the MHL device is  

connected.

Summary of Contents for 50UA6406
























Reviews: